(カテゴリ内:75点)
Frame for ROBOTIS Engineer Kit.High Strength of engineering plastic.It can be affixed tightly using bolts and nuts.There are grooves for tidy wiring and nut fastening.
*Bolts and Nuts are not included
Only compatible with X-Series.Not compatible with AX / DX / RX / EX-series.
Hinge Frame for DYNAMIXEL X-series 430 models(XL430 and XC430).
Frame set consists of a hinge frame and a set of idler bearings.
*Hinge frame and Idler set are included.
Compatible with XL430 and XC430 Models.
* XM430 and XH430 users are required to use FR12-H101K Set.
NOT compatible with the DYNAMIXEL MX series.
Side frame set for X540 series.
Can be used by assembling on the side of the Dynamixel.
■ Basic Components
Components
Quantity
Frame
FR13-S101K
1
Screw
Flat head Wrench Bolt FWB M2.5x17
4
Wrench Bolt WB M2.5x5
8
Wrench Bolt WB M2.5x4
10
Etc.
Spacer Ring
■ Warning
Cannot be assembled with DYNAMIXEL MX Series.
HN13-N105 is the standard horn set for Dynamixel XW540 models.
This horn set can be assembled on the output shaft wheel gear of Dynamixel in order to assemble with frames such as a hinge or an adapter.
XW540 Series
Cannot be assembled with DYNAMIXEL AX/RX/MX Series, XM/XH430 , XM/XH540 Sereis
ALF-M101 is a mounting plate which enables DYNAMIXEL to be mounted on the T-slot Aluminum Profile.
■ DESCRIPTION
- Bioloid exclusive plastic washer and bushing.
- Can be used as a bearing when assembled with the hinge onto the AX-12+
- Compatible with other Bioloid exclusive plastic frames series.
- Frame is stronger and is made with engineering plastic material.
■ INCLUDES
- Plastic Washer : 20 sets
- Plastric Busher : 10 sets
**Bolt/Nut not included**
♣ This product is used to assembled with the AX-series dynamixel and is not compatible with other DX/RX/EX series dynamixels.
♣♣ For bolts and nuts, please purchase the Bioloid Bolt/Nut Set.
ベアリング付高剛性サーボホーン
ROBLE D'Kitty用パーツ
- DYNAMIXEL X330 exclusive hinge frames and idler set
- Manufactured with high strength of engineering plastic
- Can be affixed tightly using bolts and nuts
- Grooved for tidy wiring and nut fastening
- It packaged in a hinge frame and idler bearing set.
- This frame set is compatible with X330 series only.- Not compatible with other series such as X540, X430, AX, DX, RX and EX.
- DYNAMIXEL X330 exclusive frames
■ Description
Gripper frame set for DYNAMIXEL X430 series.
Can be used with XH/XM430 or XL430 depending on the idler set.
FR12-E170 GM
FR12-E171 GM
WB M2x3
12
FHS M2.5x14
6
■ Compatible Products
Dynamixel X430 series (all models)
(However, idler set is required)
■ Required Products
Idler set is required to use this frame with DYNAMIXEL X430.
Be sure to purchase one of the idler sets below.
XH430, XM430 : HN12-I101 Set
XL430 : HN11-I101 Set
■ Hyperlinks
Download Drawing : Click Here
FR12-H101K Set[903-0239-000]
XL430-W250-Tを使用の場合
別途アイドラーホーンHN11-I101 Set[903-0265-000]が必要です。
■ 特徴
ダイナミクセルXシリーズ430用のヒンジフレーム(サーボアーム)セットです。
ヒンジフレームとアイドラーベアリングのセットで構成されています。
ヒンジフレームはサーボホーン(本製品には含まれません)とアイドラーホーンに取り付けて使用します。
■ 内容
内容
個数
フレーム
FR12-H101K
1個
ベアリング
HN12-I101
1セット
ボルト
皿ボルト (M2.5x14)
4個
キャップボルト (M2×3)
18個
キャップボルト (M2.5×4)
8個
その他
ザグリ穴用スペーサー
10個
■ 対応製品
ダイナミクセルXシリーズ XH430,XM430
■技術資料
図面ダウンロード(DWG,PDF,STEP,IGES)
■ 注意
既存のダイナミクセルRX-24F、MX-28シリーズにこのフレームを取り付けることは出来ません。
既存のRX-24F、MX-28シリーズ対応フレームFR07シリーズの一部とはPCDΦ16のM2ネジ穴8等配(サーボホーンを取り付ける穴)を利用することで連結が可能です。
Hinge frame set for DYNAMIXEL X430 series.
Same frame with ROBOTIS OP3’s lower frame.
FR12-H103 GM
WB M2x4K
WB M2.5x4
-Extended Hinge Frame for X430, which is used in OpenManipulator – TB3 Friends.
-It can be extended on the hinge axis and can be used in combination with an intersecting axis.
-Can be attached on XH/XM430 or XL430 depending on the idler set.
Qty
FR12-H104K
Bolt FHS M2.5x14
X430シリーズ用組立済アルミフレーム クロス取り付けタイプ
ダイナミクセルXシリーズ430用のフレームセットです。
サーボの側面(長辺)に対して取り付けて使用します。
FR12-S101K
サーボの下面(短辺)に対して取り付けて使用することが出来ます。
FR12-S102K
X540シリーズ用アルミフレーム連結ブラケット
-Hinge frame set for X540 series.
-Hinge frame and Idler Bearing set are included.
FR13-H101K
Bearing
HN13-I101 Set
Screws
Wrench Bolt M2.5x4
18
Hinge frame set for XW540 series
It packaged in a hinge frame and idler bearing set.
FR13-H105K
HN13-I105 Set
* This image is an example of assembling the waterproof option frame for XW540
Side frame set for X540 series
Can be used by assembling on the bottom side of the Dynamixel.
FR13-S102K
Side frame set for XW540 series
Can be used by assembling on the top, bottom side of the DYNAMIXEL.
FR13-S105K
Can be used by assembling on the side of the DYNAMIXEL.
FR13-S106K
-DYNAMIXEL XW430 exclusive frames
-Includes hinge frame and idler bearing as a set
Product Name
HN12-I105 Set
XW430 Waterproof Model
This image shows an example of how to assemble the optional frame on XW430.
-Not compatible with other DYNAMIXEL series such as AX/MX, XM/XH430, and XM/XH540.
お問い合わせ