(カテゴリ内:78点)
Frame for ROBOTIS Engineer Kit.High Strength of engineering plastic.It can be affixed tightly using bolts and nuts.There are grooves for tidy wiring and nut fastening.
*Bolts and Nuts are not included
Only compatible with X-Series.Not compatible with AX / DX / RX / EX-series.
Hinge Frame for DYNAMIXEL X-series 430 models(XL430 and XC430).
Frame set consists of a hinge frame and a set of idler bearings.
*Hinge frame and Idler set are included.
Compatible with XL430 and XC430 Models.
* XM430 and XH430 users are required to use FR12-H101K Set.
NOT compatible with the DYNAMIXEL MX series.
Side frame set for X540 series.
Can be used by assembling on the side of the Dynamixel.
■ Basic Components
Components
Quantity
Frame
FR13-S101K
1
Screw
Flat head Wrench Bolt FWB M2.5x17
4
Wrench Bolt WB M2.5x5
8
Wrench Bolt WB M2.5x4
10
Etc.
Spacer Ring
■ Warning
Cannot be assembled with DYNAMIXEL MX Series.
DYNAMIXEL XW540シリーズ専用サーボホーン
DYNAMIXEL XW430シリーズ専用アイドラーホーン
ALF-M101 is a mounting plate which enables DYNAMIXEL to be mounted on the T-slot Aluminum Profile.
■ DESCRIPTION
- Bioloid exclusive plastic washer and bushing.
- Can be used as a bearing when assembled with the hinge onto the AX-12+
- Compatible with other Bioloid exclusive plastic frames series.
- Frame is stronger and is made with engineering plastic material.
■ INCLUDES
- Plastic Washer : 20 sets
- Plastric Busher : 10 sets
**Bolt/Nut not included**
♣ This product is used to assembled with the AX-series dynamixel and is not compatible with other DX/RX/EX series dynamixels.
♣♣ For bolts and nuts, please purchase the Bioloid Bolt/Nut Set.
ベアリング付高剛性サーボホーン
ROBLE D'Kitty用パーツ
- DYNAMIXEL X330 exclusive hinge frames and idler set
- Manufactured with high strength of engineering plastic
- Can be affixed tightly using bolts and nuts
- Grooved for tidy wiring and nut fastening
- It packaged in a hinge frame and idler bearing set.
- This frame set is compatible with X330 series only.- Not compatible with other series such as X540, X430, AX, DX, RX and EX.
- DYNAMIXEL X330 exclusive frames
■ Description
Gripper frame set for DYNAMIXEL X430 series.
Can be used with XH/XM430 or XL430 depending on the idler set.
FR12-E170 GM
FR12-E171 GM
WB M2x3
12
FHS M2.5x14
6
■ Compatible Products
Dynamixel X430 series (all models)
(However, idler set is required)
■ Required Products
Idler set is required to use this frame with DYNAMIXEL X430.
Be sure to purchase one of the idler sets below.
XH430, XM430 : HN12-I101 Set
XL430 : HN11-I101 Set
■ Hyperlinks
Download Drawing : Click Here
FR12-H101K Set[903-0239-000]
XL430-W250-Tを使用の場合
別途アイドラーホーンHN11-I101 Set[903-0265-000]が必要です。
■ 特徴
ダイナミクセルXシリーズ430用のヒンジフレーム(サーボアーム)セットです。
ヒンジフレームとアイドラーベアリングのセットで構成されています。
ヒンジフレームはサーボホーン(本製品には含まれません)とアイドラーホーンに取り付けて使用します。
■ 内容
内容
個数
フレーム
FR12-H101K
1個
ベアリング
HN12-I101
1セット
ボルト
皿ボルト (M2.5x14)
4個
キャップボルト (M2×3)
18個
キャップボルト (M2.5×4)
8個
その他
ザグリ穴用スペーサー
10個
■ 対応製品
ダイナミクセルXシリーズ XH430,XM430
■技術資料
図面ダウンロード(DWG,PDF,STEP,IGES)
■ 注意
既存のダイナミクセルRX-24F、MX-28シリーズにこのフレームを取り付けることは出来ません。
既存のRX-24F、MX-28シリーズ対応フレームFR07シリーズの一部とはPCDΦ16のM2ネジ穴8等配(サーボホーンを取り付ける穴)を利用することで連結が可能です。
Hinge frame set for DYNAMIXEL X430 series.
Same frame with ROBOTIS OP3’s lower frame.
FR12-H103 GM
WB M2x4K
WB M2.5x4
-Extended Hinge Frame for X430, which is used in OpenManipulator – TB3 Friends.
-It can be extended on the hinge axis and can be used in combination with an intersecting axis.
-Can be attached on XH/XM430 or XL430 depending on the idler set.
Qty
FR12-H104K
Bolt FHS M2.5x14
X430シリーズ用組立済アルミフレーム クロス取り付けタイプ
ダイナミクセルXシリーズ430用のフレームセットです。
サーボの側面(長辺)に対して取り付けて使用します。
FR12-S101K
サーボの下面(短辺)に対して取り付けて使用することが出来ます。
FR12-S102K
X540シリーズ用アルミフレーム連結ブラケット
-Hinge frame set for X540 series.
-Hinge frame and Idler Bearing set are included.
FR13-H101K
Bearing
HN13-I101 Set
Screws
Wrench Bolt M2.5x4
18
DYNAMIXEL XW540シリーズ専用拡張フレーム
Side frame set for X540 series
Can be used by assembling on the bottom side of the Dynamixel.
FR13-S102K
お問い合わせ