(カテゴリ内:80点)
Frame for ROBOTIS Engineer Kit.High Strength of engineering plastic.It can be affixed tightly using bolts and nuts.There are grooves for tidy wiring and nut fastening.
*Bolts and Nuts are not included
Only compatible with X-Series.Not compatible with AX / DX / RX / EX-series.
Hinge Frame for DYNAMIXEL X-series 430 models(XL430 and XC430).
Frame set consists of a hinge frame and a set of idler bearings.
*Hinge frame and Idler set are included.
Compatible with XL430 and XC430 Models.
* XM430 and XH430 users are required to use FR12-H101K Set.
NOT compatible with the DYNAMIXEL MX series.
Side frame set for X540 series.
Can be used by assembling on the side of the Dynamixel.
■ Basic Components
Components
Quantity
Frame
FR13-S101K
1
Screw
Flat head Wrench Bolt FWB M2.5x17
4
Wrench Bolt WB M2.5x5
8
Wrench Bolt WB M2.5x4
10
Etc.
Spacer Ring
■ Warning
Cannot be assembled with DYNAMIXEL MX Series.
DYNAMIXEL XW540シリーズ専用サーボホーン
DYNAMIXEL XW430シリーズ専用アイドラーホーン
The XC330 series is a compact and lightweight DYNAMIXEL.XC330 series is an upgraded version of XL330 series. It enhanced its durability by applying Metal Gear and Bearing.
*Please be aware that the voltage range is 3.7V ~ 6V.
* Please purchase the frames for the X330 models separately.
* The idler and the idler cap are included in the FPX330-H101 4PCS Set. (Not sold as a standalone.)
Drawing Download
This product applies metal ball bearings to the XC430 series instead of plastic bushing. This change improves the durability of vertical loads on the axis of rotation. Other specifications are the same as the existing XC430 series.
1. Various Operating Modes
(Velocity Control, Position Control, Extended Position Control, PWM Control)
2. Profile Control for Smooth Motion Planning
3. Hollow Back Case Minimizes Cable Stress (3-way-routing)
4. Easy and Simple Assembly Structure
5. Energy Saving with Reduced Current
6. Increase vertical load durability by using metal ball bearings
Not included Idler Set (HN11-i101 Set)
DYNAMIXEL-X Series cable assembly through hollow case
Organize the entangled cable before assembling the back case.
Do not assemble the back case with entangled cable. The entangled cable can be squashed by the case and cause communication error.
If you use two cables through the hollow case, the cables will be damaged.
Use only one cable through the hollow case.
The DYNAMIXEL-X Series adopted a new gold-plated JST connector for secure and reliable communication.
The connector used for previous Dynamixel is Molex.
To control DYNAMIXEL-X Series actuators via OpenCM or USB2Dynamixel, please use the JST-Molex Convertible Cable enclosed in the package.
However, the Molex-JST convertible cable is NOT included in the XL430 model.
Please purchase a convertible cable when using a controller and interface that supports the JST connector.
Velocity Control, Position Control, Extended Position Control, PWM Control
3. Hollow Back Case Minimizes Cable Stress
4. Direct Screw Assembly to the Case (Some parts)5. Energy Saving with Reduced Current
* Idler Set(HN11-I101 Set) for assembling hinge frames are not included.
Controller : OpenCM9.04 + 485 Expansion Board, OpenCR1.0, CM-550
Interface : USB2Dynamixel, U2D2
ID(A) : 1
ID(B) : 2
Baud Rate : 57600bps
(User can change various settings including ID and baud rate according to environment)
Molex-JST conversion cable is not included with the purchase of 2XC430 Dynamixel, so you must purchase Molex-JST conversion cable separately to connect to the existing controller (OpenCM 485 expansion board, USB2Dynamixel).
DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Reduction Gearhead + Controller + Driver + Network in one DC servo module.
The DYNAMIXEL 2XL series can control two axis with a single module, so it can be easily used when used in robot`s neck, shoulder, hip, wrist, and ankle. The 2XL series adopts new features that allow 360 degrees control mode with its contactless magnetic encoder and hollow back case assembly structure and Metal gear (Powder Metallurgy) is used for high durability. High compatibility with XL430, XM430, XH430.
Controller : OpenCM9.04 485 Expansion Board, OpenCR1.0, CM-550
Molex-JST conversion cable is not included with the purchase of 2XL430 Dynamixel, so you must purchase Molex-JST conversion cable separately to connect to the existing controller (OpenCM 485 expansion board, USB2Dynamixel).
ALF-M101 is a mounting plate which enables DYNAMIXEL to be mounted on the T-slot Aluminum Profile.
名称
Dynamixel XL-320
重量
16.7 g
サイズ
24mm x 36mm x 27mm
ギヤ比
238 : 1
定格電圧 (V)
7.4
ストールトルク (kg・cm)
3.82
無付加回転数 (RPM)
114
モーター
DCコアードモーター
分解能
0.29° x 1,024step
動作範囲
関節モード : 300°
車輪モード : 無限回転
電圧範囲
6~8.4V (定格 : 7.4V)
温度範囲
-5°C ~ 70°C
通信形式
Digital Packet
プロトコル
半二重シリアル通信(8bit,1stop,No Parity)
DXL2.0
接続
TTL レベルマルチドロップ接続
(デイジーチェーン接続)
ID
253 ID (0~252)
通信速度
7843bps ~ 1Mbps
読み取り可能な値
現在位置,回転方向,内部温度,負荷,入力電圧,エラー情報 etc.
材質
ケース : エンジニアリングプラスチック
ギヤ : エンジニアリングプラスチック
ベアリング付高剛性サーボホーン
- DYNAMIXEL X330 exclusive hinge frames and idler set
- Manufactured with high strength of engineering plastic
- Can be affixed tightly using bolts and nuts
- Grooved for tidy wiring and nut fastening
- It packaged in a hinge frame and idler bearing set.
- This frame set is compatible with X330 series only.- Not compatible with other series such as X540, X430, AX, DX, RX and EX.
- DYNAMIXEL X330 exclusive frames
■ Description
Gripper frame set for DYNAMIXEL X430 series.
Can be used with XH/XM430 or XL430 depending on the idler set.
FR12-E170 GM
FR12-E171 GM
WB M2x3
12
FHS M2.5x14
6
■ Compatible Products
Dynamixel X430 series (all models)
(However, idler set is required)
■ Required Products
Idler set is required to use this frame with DYNAMIXEL X430.
Be sure to purchase one of the idler sets below.
XH430, XM430 : HN12-I101 Set
XL430 : HN11-I101 Set
■ Hyperlinks
Download Drawing : Click Here
FR12-H101K Set[903-0239-000]
XL430-W250-Tを使用の場合
別途アイドラーホーンHN11-I101 Set[903-0265-000]が必要です。
■ 特徴
ダイナミクセルXシリーズ430用のヒンジフレーム(サーボアーム)セットです。
ヒンジフレームとアイドラーベアリングのセットで構成されています。
ヒンジフレームはサーボホーン(本製品には含まれません)とアイドラーホーンに取り付けて使用します。
■ 内容
内容
個数
フレーム
FR12-H101K
1個
ベアリング
HN12-I101
1セット
ボルト
皿ボルト (M2.5x14)
4個
キャップボルト (M2×3)
18個
キャップボルト (M2.5×4)
8個
その他
ザグリ穴用スペーサー
10個
■ 対応製品
ダイナミクセルXシリーズ XH430,XM430
■技術資料
図面ダウンロード(DWG,PDF,STEP,IGES)
■ 注意
既存のダイナミクセルRX-24F、MX-28シリーズにこのフレームを取り付けることは出来ません。
既存のRX-24F、MX-28シリーズ対応フレームFR07シリーズの一部とはPCDΦ16のM2ネジ穴8等配(サーボホーンを取り付ける穴)を利用することで連結が可能です。
Hinge frame set for DYNAMIXEL X430 series.
Same frame with ROBOTIS OP3’s lower frame.
FR12-H103 GM
WB M2x4K
WB M2.5x4
-Extended Hinge Frame for X430, which is used in OpenManipulator – TB3 Friends.
-It can be extended on the hinge axis and can be used in combination with an intersecting axis.
-Can be attached on XH/XM430 or XL430 depending on the idler set.
Qty
FR12-H104K
Bolt FHS M2.5x14
ダイナミクセルXシリーズ430用のフレームセットです。
サーボの側面(長辺)に対して取り付けて使用します。
FR12-S101K
サーボの下面(短辺)に対して取り付けて使用することが出来ます。
FR12-S102K
-Hinge frame set for X540 series.
-Hinge frame and Idler Bearing set are included.
FR13-H101K
Bearing
HN13-I101 Set
Screws
Wrench Bolt M2.5x4
18
DYNAMIXEL XW540シリーズ専用拡張フレーム
Side frame set for X540 series
Can be used by assembling on the bottom side of the Dynamixel.
FR13-S102K
DYNAMIXEL XW430シリーズ専用拡張フレーム
HN11-I101 is the standard idler bearing set for Dynamixel XL 430 series.
This idler bearing is connected to the opposite side of the output shaft of Dynamixel X, and can
be used to assemble the hinge frame on it.
Patented hollow structure enables this set to be assembled with Dynamixels without screws.
Items
Bearing Set
Idler (HN11-I101)
Idler Cap (DC11)
Bolt (PHS M3*5)
* Hinge frame not included
■ Assembly
■ Part Features
Idler : The idler is firmly assembled with Dynamixel by hooking mechanism and additional frames such as hinge can be assembled on it.
Idler Cap : The cap protects debris such as screws getting into the Dynamixel through the hollow structure.
Dynamixel X Compatibility Chart : Click Here
■ More Info
Compatible products
Download product drawings
Idler Bearing Set for Dynamixel X540 Series.
This idler bearing is connected to the opposite side of the output shaft of Dynamixel X, and can be used to assemble the hinge frame on it.
(Enclosed screws are used to assemble the frame to the idler.)
Bearing (6701ZZ)
Idler (HN13-I101)
Idler Cap (DC13)
Wrench Bolt (WB M2.5*5)
Wrench Bolt (WB M2.5*4)
* The hinge frame is not included
The above image is for the X430 bearing set. Bearing set for X540 is commercial metal bearing.
* Bearing : Specially designed high strength engineering bearing. (Model No. : 6701ZZ)
* Idler : The idler is firmly assembled with Dynamixel by hooking mechanism and additional frames such as hinge can be assembled on it.
* Idler Cap : The cap protects debris such as screws getting into the Dynamixel through the hollow structure.
This idler bearing set cannot be assembled with Dynamixel MX series.
DYNAMIXEL XW540シリーズ専用アイドラーホーン
■ Basic Features
Gear set for Dynamixel XH430/XM430 – Gear Ratio: 210 : 1
Can be replaced directly when existing gears are worn out.
Made with metal and specially coated to strengthen endurance and durability of abrasion.
Exclusive magnet for non-contact absolute encoder is attached to the wheel gear.
Two ball bearings are included.
■ Package Contents
Description
Q
Gear
X430 Gear #1 (for 210)
X430 Gear #2 (for 210)
X430 Gear #3
X430 Wheel Gear
Etc
Grease
Calibration Adaptor (for X430)
Ball Bearing
2
DYNAMIXEL
Gear/Bearing Set
X430-350
X430-210
XH430-W350-R
O
XH430-W350-T
XH430-W210-R
XH430-W210-T
XH430-V350-R
XH430-V210-R
XM430-W350-R
XM430-W350-T
XM430-W210-R
XM430-W210-T
** Check the gear ratio of the Dynamixel’s gear to replace.
Gear set for Dynamixel XH430/XM430 – Gear Ratio: 350 : 1
X430 Gear #1 (for 350)
X430 Gear #2 (for 350)
■ Gear Replacement Procedure
■ Gear Calibration Procedure
Gear set for Dynamixel XH540/XM540 ? Gear Ratio: 150 : 1
X430, X540 same (??????)
Two ball bearings are used for the wheel gears.
The bearing of the bottom wheel gear is connected when shipped.
When replacing the gear, assemble after connecting the top wheel gear.
It is possible to recycle the used bearings, but it is recommended to use new ones because of the performance degradation due to abrasion, debris, etc.
Since Dynamixel X series use non-contact magnetic encoders, you will have to calibrate to align the initial position after gear replacement.
Use R+Manager2.0 to process the calibration along with the calibration adapter.
These are not compatible with DX/RX/MX series.
Gear set for Dynamixel XH540/XM540 ? Gear Ratio: 270 : 1
Controller : Arduino MKR Shield
ID : 1
DYNAMIXEL XC430-W150-T
XL-430シリーズの上位機種で
DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor Reduction Gearhead Controller Driver Network in one DC servo module.
The DYNAMIXEL XC series adopts new features that allow 360 degrees control mode with its contactless magnetic encoder and hollow back case assembly structure. The XL series has the same mechanical structure as the XM430 and XH430 and is compatible with the respective models.
XC430 is a high performance version of XL430 (Entry-level DYNAMIXEL), that can be applied to robots that require stronger torque.Metal gears are adopted to enhance its durability.
4. Direct Screw Assembly to the Case (without Nut Insert)5. Energy Saving with Reduced Current
* Not included Idler Set for assembling hinge frames
Controller : OpenCM9.04 485 Expansion Board, OpenCR1.0
DYNAMIXEL X-Series cable assembly through hollow case
The DYNAMIXEL X-Series adopted a new gold-plated JST connector for secure and reliable communication.
To control DYNAMIXEL X-Series actuators via OpenCM or USB2Dynamixel, please use the JST-Molex Convertible Cable enclosed in the package.
お問い合わせ