教育用ロボット、研究用ロボット、競技用ロボット、ROBOTIS、DYNAMIXEL、DARWIN-OP、DARWIN-MINI、ロボット部品、プロショップ、ロボット販売

dynamixel、ダイナミクセル、サーボ、ロボットサーボ、アクチュエータ、コマンド式、デイジーチェーン、ROBOTIS、ロボティス dynamixel、ダイナミクセル、サーボ、ロボットサーボ、アクチュエータ、コマンド式、デイジーチェーン、ROBOTIS、ロボティス

商品一覧

表示件数:
12 3 4 5 6 7 8 9 次へ >>

(全商品:430点)

  • DYNAMIXEL 3D DATA
    DYNAMIXEL 3D DATA
    DYNAMIXELやフレーム、ホーンの3D DATAです。STEPデータもダウンロード可能です。



    0円
    在庫数 : 0
  • PhantomX AX Metal Hexapod Mark III Kit
    PhantomX AX Metal Hexapod Mark III Kit
    PhantomX AX Metal Hexapod MK-III Kitは
    名機「アメリカ産まれの六脚野郎”PhantomX”」の構造を踏襲し、
    ついにフレームがアルミになっり強固になり、
    よりデザインが洗練された第三世代の六脚野郎です。
    ArdinoベースのDynamixel対応マイコンArbotiX RobocontrollerのサンプルNUKEソースコードも新しくなりました。
    まだ研究の余地の十分残っている多脚の世界。
    これからの日本の将来を担う若い工学者、研究者、学生にお勧めします。

    日本国内では国立大学、企業内の研究など
    複数の導入事例があります。

    ZigBee無線送信機ArbotiX Commander、充電器、バッテリー等必要なものはすべて含まれるオールインワンキットです。
    六脚は抜群の安定性と速度を備えますのでミッションクリティカルな、オペレーションには最大な効果発揮します。AX-12AバージョンとAX-18Aバージョンがあります。

    価格、納期はお問合せ下さい。完成品は現在承っておりません。
    0円
    価格、納期はお問合せ下さい。
  • Custom MX-106T 6 DOF Humanoid Robot Leg Kit Set
    Custom MX-106T 6 DOF Humanoid Robot Leg Kit Set
    弊社のGIGA DYNAMIZERとほぼ同一プロポーションの
    中型ヒューマノイドの脚部アッセンブリーキットです。
    受注生産です。お問い合わせ下さい。
    0円
    価格、納期はお問合せ下さい。
  • DYNAMIXEL AX-18F
    DYNAMIXEL AX-18F
    ※※※本製品はメーカー廃盤となりました、後継機種は「AX-18A」です※※※

    【主な仕様】
    •Stall Torque:18kgf.cm(at 12.0V、2.2A)
    •No load speed : 97rpm(at 12V)
    •重量:54.5g
    •サイズ:32mm * 50.1mm * 40mm

    【AXシリーズ ROBOTIS e-マニュアル】

    DYNAMIXEL AXシリーズ ROBOTIS e-マニュアル

    ※その他仕様は詳細ページをご参照ください。
    0円
    メーカー廃盤品、「AX-18A」をお買い求めください。
  • PhantomX Pincher Robot Arm Kit
    PhantomX Pincher Robot Arm Kit
    PhantomX Pincher Robot Arm Kitは弊社の社友である米Trossen Robotics社製のエントリー向けのロボットアームです。
    ROBOTIS社のエントリー向けアクチュエータDYNAMIXEL AX-12Aを5個搭載し関節配置はヨー関節1、ピッチ関節3、エンドエフェクター関節(グリッパー)1(5dof)です。

    価格、納期はお問合せ下さい。
    0円
    価格、納期はお問合せ下さい。
  • 総合開発環境RoboPlus[日本語版]フリーダウンロード
    総合開発環境RoboPlus[日本語版]フリーダウンロード
    RoboPlusはROBOTIS社製のロボットキット、ロボットコントローラ、Dynamixelアクチュエータ、通信機器向けの各種アプリケーションが統合された総合開発環境です。


    RoboPlusは下記サイトからフリーダウンロード可能です(登録等不要)


    ※本商品をカートに入れてもお買い上げいただけません。
    0円
    注文数:
  • PhantomX Reactor Robot Arm Kit
    PhantomX Reactor Robot Arm Kit
    PhantomX Reactor Robot Arm Kitは
    弊社の社友である米Trossen Robotics社製のミッドレンジエントリー向けのロボットアームです。
    ROBOTIS社のエントリー向けアクチュエータAX-12Aを
    7個搭載し関節配置はヨー関節1、ピッチ関節3(うち2軸がダブルアクチュエータ)、エンドエフェクター関節(グリッパー)1
    を持ちます。

    価格、納期はお問合せ下さい。完成品も承ります。
    0円
    価格、納期はお問合せ下さい。
  • WindowX Robot Arm Kit
    WindowX Robot Arm Kit
    WindowX Robot Arm Kitは弊社の協力企業である米TrossenRobotics社製のハイエンドクラスのロボットアームです。

    日本国内では設備系企業で軽作業用アーム型ロボットの研究・開発、試作用として導入事例があります。

    ROBOTIS社のDynamixelアクチュエータを6個搭載し関節配置はヨー関節1、ピッチ関節3、エンドエフェクター関節2(ヨー&グリッパー)を持ちます。

    研究者や学生にもお勧めします。コントローラはArduinoベースでDynamixel対応のArbotiX Robotcontrollerです。
    各種DYNAMIXLが6個付属します(詳細ページご覧ください)。
    価格、納期はお問合せ下さい。完成品は現在承っておりません。
    0円
    価格、納期はお問合せ下さい。
  • Mars Lite Series 36
    Mars Lite Series 36
    DJI Phantom1と2用のパラシュートシステムです。
    弊社はこの他MARSの全パラシュートシステムを取り扱っています。
    お問い合わせください。
    [youtube:動画5KWGh-M4HDc,200x200]
    Announcing the worlds lightest professional drone parachute,; weighing in at 2.1 oz (59.5grams) the Mars Lite 36  is almost half the weight of the Mars Mini.
    0円
    様々な仕様があります。お問合せ下さい。
  • PhantomX XL430 Robot Turret[IL-PXT-X]
    PhantomX XL430 Robot Turret[IL-PXT-X]

    The PhantomX XL430 Robot Turret is a fully programmable pan and tilt system designed around the DYNAMIXEL DYNAMIXEL XL430-W250-T servos from Robotis. The servos offer a high resolution of 4096 positions and user definable PID parameters. Temperature monitoring, positional feedback as well as voltage levels, load and compliance settings are all user accessible as well. At the heart of the PhantomX XL430 Turret is the Robotis Open CM9.04-C open-source controller running on a 32bit ARM Coretex-M3.

    PhantomX XL430 Turret
    ProtocolTTL
    Payload 500g
    Resolution4096
    Weight475g



    Product Features:XL430-W250-T ServosRoller Bearing BaseOpenCM9.04-C for Onboard Processing2 DOFIncludes:2x XL430-W250-T Actuators1x OpenCM9.04-C1x 12v2a Power Supply1x USB2 Micro Cable
    Mounting Hardware:
     The base comes with mounting thumb screws to secure the arm easileasily to most any surface, wood screws are also an option for a mormore permanent mounting solution.

    Documentation:





    0円
    価格、納期はお問合せ下さい。
  • PhantomX Robot Turret Kit
    PhantomX Robot Turret Kit
    Dynamixel AXシリーズを使用した、本格的ながらコストを抑えたパン・チルトターレットです。


    Dynamixel AX-12Aは、同価格帯のR/Cサーボに比べ、動作範囲が広く(300度)、音響ノイズが少なめです。また、ハンチング(発振)などのみっともない挙動が起きません。

    DynamixelはPCから直接制御可能(MATLAB対応、C言語SDK配布)ですので、Webカメラを搭載し、本格的なビジョントラッキングにも使用可能です。

    Arduino互換マイコンArbotiXにより、Arduino言語で開発が可能です。
    ArobotiXにはDynamixelを制御するためのライブラリが付属しています。

    価格、納期はお問合せ下さい。
    0円
    価格、納期はお問合せ下さい。
  • SMD DYNA ARM
    SMD DYNA ARM
    弊社はオリジナルのロボットアームDYNA ARMシリーズを製作販売しております。
    教育研究現場は勿論ですが、企業様の生産技術現場にも採用されています。
    オーダーメイド案件が多いので、是非ご相談下さい。
    0円
    価格、納期はお問合せ下さい。完成品も承ります。
  • WidowX XM430 Robot Turret[IL-WXT-S]
    WidowX XM430 Robot Turret[IL-WXT-S]

    The WidowX XM430 Robot Turret is a fully programmable pan and tilt system designed around the DYNAMIXEL  DYNAMIXEL XM-430-W350-T
    servos from Robotis. The servos offer a high resolution of 4096 positions and user definable PID parameters. Temperature monitoring, positional feedback as well as voltage levels, load and compliance settings are all user accessible as well. At the heart of the WidowX XM430 Turret is the Robotis Open CM9.04-C open-source controller running on a 32bit ARM Coretex-M3.

    Please note: The WidowX XM430 Turret will not hold position if power to the unit is lost, any equipment mounted may be damaged if not properly secured. Please use caution when mounting equipment that may be fragile or prone to damage if the turret loses power.

    WidowX XM430 Turret
    ProtocolTTL
    Payload 2250g
    Resolution4096
    Weight1350g

    INDUSTRIAL GRADE BEARING:

    Each of the X-Series arms* features an industrial quality, high grade slewing bearing base as the central mounting point. The bearing ensures maximum rigidity and accuracy and takes all strain of the base servo increasing the longevity of the arms.



    Product Features:XM430-W350-TServosIndustrial Bearing BaseOpenCM9.04-C for Onboard Processing2 DOFIncludes:2x XM430-W350 Actuators1x OpenCM9.04-C1x 12v5a Power Supply1x USB2 Micro Cable








    DYNAMIXEL XM430-W350-T
    Model NumberXM430-W350-T
    Weight (g)82g
    Dimensions (mm)28.5mm x 46.5mm x 34mm
    Gear Ratio353.5 : 1
    Operation Voltage (V)11.11214.8
    Stall Torque (N.m)3.84.14.8
    Stall Current (A)2.12.32.6
    No Load Speed (RPM)434657
    MCUST CORTEX-M3 (STM32F103C8 @ 72MHZ,32BIT)
    Position SensorContactless absolute encoder (12BIT,360°) by AMS
    MotorCoreless Motor
    Resolution0.088° x 4,096
    Operating RangePosition Control Mode : 360°
    Velocity Control Mode : Endless turn
    Input Voltage (V)10~14.8V (Recommended voltage : 12V)
    Operating Temperature (°C)-5°C ~ 80°C
    Command SignalDigital Packet
    Protocol TypeHalf duplex Asynchronous Serial Communication (8bit,1stop, No Parity)
    Link (physical)TTL Level Multi Drop Bus
    ID253 ID (0~252)
    Baud Rate9600 bps ~ 4.5 Mbps
    FeedbackPosition, Velocity, Current, Realtime tick, Trajectory, Temperature, Input Voltage, etc.
    MaterialCase : Metal (Front, Middle)
    Engineering Plastic (Back)
    Gear : Full Metal
    Standby current40 mA





    a
    Mounting Hardware:
    The base comes with mounting thumb screws to secure the arm easily to most any surface, wood screws are also an option for a more permanent mounting solution.

    Documentation:
    0円
    価格、納期はお問合せ下さい。
  • 多脚ロボットプラットフォーム Phantom-X(ファントム エックス) PDFカタログ
    多脚ロボットプラットフォーム Phantom-X(ファントム エックス) PDFカタログ




    6脚 HEXAPOD PHANTOM-X 組立調整済み完成品フルセット





    PDFカタログダウンロード





    6脚 最強HEXAPODロボット PANTOM-X、DYNAMIXEL AX-18A 18自由度、ARDINO系ロボットコントローラARBOTIX搭載、XBEEペアリング済、ARBOTICS COMMANDER、基本プログラムアップロード済




    SMD YOU TUBE動画 PHANTOM-X ROUGE ROAD WALKING


    http://www.youtube.com/watch?v=IInSMUgBFh0&list=UURqS3_0g4GEeerdAjMlji-w


    SMD YOUTUBE 動画 PHANTOM-X LAWN GIRDEN WALKING


    http://www.youtube.com/watch?v=jgvpoASpc_E&list=UURqS3_0g4GEeerdAjMlji-w&index=2&feature=plcp


    SMD YOU TUBE動画 PHANTOM-X 2Kg PAYLOAD WALKING TEST


    http://www.youtube.com/watch?feature=relmfu&v=cL3r2Vw5sSI&gl=JP




    0円
    PDFカタログのダウンロードはフリーです。
  • WidowX MX-28 Robot Turret Kit
    WidowX MX-28 Robot Turret Kit
    Dynamixel MX-28を使用した、研究用途にも耐えうるパン・チルトターレットです。


    Dynamixel MX-28は、よく他社製のローコストのターレットにキットに使用されている安物のR/Cサーボに比べ、高精度(360度/4096step)で動作時の音響ノイズも遥かに少ないです。

    国内ではマイクを搭載して、音位測定など実際の研究用途に活用されています。

    Arduino互換マイコンArbotiXにより、Arduino言語で開発が可能です。
    ArobotiXにはDynamixelを制御するためのライブラリが付属しています。

    価格、納期はお問合せ下さい。

    0円
    価格、納期はお問合せ下さい。
  • ViperX XM540 Robot Turret[IL-VXT-S]
    ViperX XM540 Robot Turret[IL-VXT-S]

    The ViperX XM540 Robot Turret is a fully programmable pan and tilt system designed around the DYNAMIXEL XM540-W270-R servos from Robotis. The servos offer a high resolution of 4096 positions and user definable PID parameters. Temperature monitoring, positional feedback as well as voltage levels, load and compliance settings are all user accessible as well. At the heart of the ViperX XM540 Turret is the Robotis Open CM9.04-C open-source controller running on a 32bit ARM Coretex-M3.

    Please note: The ViperX XM540 Turret will not hold position if power to the unit is lost, any equipment mounted may be damaged if not properly secured. Please use caution when mounting equipment that may be fragile or prone to damage if the turret loses power.
    ViperX XM540 Turret
    ProtocolRS-485
    Payload 6800g
    Resolution4096
    Weight2160

    INDUSTRIAL GRADE BEARING:

    Each of the X-Series arms* features an industrial quality, high grade slewing bearing base as the central mounting point. The bearing ensures maximum rigidity and accuracy and takes all strain of the base servo increasing the longevity of the arms.

    Product Features:XM540-W270-R ServosIndustrial Bearing BaseOpenCM9.04-C for Onboard Processing2 DOFIncludes:2x XM540-W270 Actuators1x OpenCM9.04-C1x OpenCM 485 Expansion Board1x 12v5a Power Supply1x USB2 Micro Cable 
    DYNAMIXEL XM540-W270-R
    Model NumberXM540-W270-R
    Weight (g)165g
    Dimensions (mm)33.5mm x 58.5mm x 44mm
    Gear Ratio272.5 : 1
    Operation Voltage (V)11.11214.8
    Stall Torque (N.m)10.010.612.9
    Stall Current (A)4.24.45.5
    No Load Speed (RPM)283037
    MCUST CORTEX-M3 (STM32F103C8 @ 72MHZ,32BIT)
    Position SensorContactless absolute encoder (12BIT,360°) by AMS
    MotorCoreless Motor
    Resolution0.088° x 4,096
    Operating RangePosition Control Mode : 360°
    Velocity Control Mode : Endless turn
    Input Voltage (V)10~14.8V (Recommended voltage : 12V)
    Operating Temperature (°C)-5°C ~ 80°C
    Command SignalDigital Packet
    Protocol TypeRS485 Asynchronous Serial Communication (8bit,1stop, No Parity)
    Link (physical)RS485 Multi Drop Bus
    ID253 ID (0~252)
    Baud Rate9600 bps ~ 4.5 Mbps
    FeedbackPosition, Velocity, Current, Realtime tick, Trajectory, Temperature, Input Voltage, etc.
    MaterialCase : Metal (Front, Middle)
    Engineering Plastic (Back)
    Gear : Full Metal
    Standby current40 mA

    Mounting Hardware:
    The base comes with mounting thumb screws to secure the arm easily to most any surface, wood screws are also an option for a more permanent mounting solution.

    Documentation:

    0円
    価格、納期はお問合せ下さい。
  • 腕付きトルソ君シリーズ Hina & hina-co PDFカタログ
    腕付きトルソ君シリーズ Hina & hina-co PDFカタログ


    腕付きトルソ君シリーズ Hina & hina-co PDFカタログ





    PDFカタログダウンロード





    人間とインタラクションをとりながら、様々な「しぐさ」を表現し服飾の着こなしやポエムを演出します。今までに類の無い実社会で実装されているトルソ形のアパレルファッション向けロボットです。





    SMD Hina & hina-coアパレル向けトルソ型ポージングロボット

    http://www.machinedesign.co.jp/robot/hina/index.html


    SMD Hina & hina-co YOUTUBE動画 in 日本物作りワールド

    http://www.youtube.com/watch?v=KKfjLTzHcCc&feature=youtu.be




    0円
    PDFカタログのダウンロードはフリーです。
  • ScorpionX MX-64 Robot Turret Kit
    ScorpionX MX-64 Robot Turret Kit
    Dynamixel MX-64もしくはMX-106を使用したパワフルなパン・チルトターレットです。


    Arduino互換マイコンArbotiXにより、Arduino言語で開発が可能です。
    ArobotiXにはDynamixelを制御するためのライブラリが付属しています。

    小型ビデオカメラや、一眼レフカメラまで搭載可能です。

    価格、納期はお問合せ下さい。
    0円
    価格、納期はお問合せ下さい。
  • SMDパーソナルROV
    SMDパーソナルROV
     子供のころこの池の中はどうなっているんだろうと、潜水艦のプラモデルを何隻も沈没させてきました。弊社では大人になった今でこそ、子供の頃遊んだ湖沼で水中を探検可能なパーソナルROVという新たな水中ロボットのカテゴリーを提案、THUNDERTIGER NEPTUNEベースのROV機体をカスタマイズし実際の湖沼探検や海洋研究開発機構の訓練プールで行われる水中ロボットコンベンションのROV部門競技に参加、2013年優勝しました。

    又アメリカのキックスターターで始まったOPENROV は国境の垣根を越えて世界の研究者・ホビイストにより常に開発されている進化を続けるパーソナル ROV です。製作しだいでは 100m の深度まで潜行できます。

     水中ロボットは飛行ロボットや歩行ロボットと並び、かなり難しいカテゴリーです。弊社はNPO法人 水中ロボネット会員とし参加してハードウエアやシステムの研究を行っております。よく出来たシステムは割り切って活用しながら、自分の為の自由な ROV を開発し身近な湖沼を冒険してみませんか。
    特注、コンサル商品です。
    お気軽にお問い合わせください。
    0円
    在庫数 : 0 0
  • DYNAMIXEL総合カタログver1751その1
    DYNAMIXEL総合カタログver1751その1
    DYNAMIXELの総合カタログver1751その1です。
    0円
    在庫数 : 0
  • TOOL(STL)リベットやっとこ[913-1026-000]
    TOOL(STL)リベットやっとこ[913-1026-000]
    TOOL(STL)リベットやっとこ

    DARWWWIN-MINI、OLLO、ROBOIS DREAM、ROBOTIS PLAY DINOに
    付属のあると便利、無いと困るやっとこ状のリベット装着、取り外しツールです。
    あまり関係ないけどROBOTIS製品で最安値。
    297円
    在庫数 : 0
  • Pulley-Circle-L (SPO-4PR(GR)) 5pcs[913-1013-020]
    Pulley-Circle-L (SPO-4PR(GR)) 5pcs[913-1013-020]
    Pulley-Circle-L (SPO-4PR(GR)) 5pcs[913-1013-020]

    XL-320でDARWIN-MINIのような反対軸を構成するさいに
    これをスペーサーにして長いほうのリベットでフレームとジョイントします。
    352円
    在庫数 : 0
  • BIOLOID FP04-F17 2pcs[903-0199-000]
    BIOLOID FP04-F17 2pcs[903-0199-000]
    Dynamixel AXシリーズ、XLシリーズ、OLLOギヤードモータ対応のホイールです。
    特に、AXシリーズの高速タイプ、MX-18AとAX-12W、
    MX-12Wを動力とした車両型ロボットの構築に有用です。

    BIOLOID STEMキット付属のものと同じです。

    ※ゴムタイヤFP04-F18と、XLシリーズ、OLLOギヤードモーター用リベットセットは別売です。
    352円
    注文数:
  • BIOLOID FP04-F54 4pcs[903-0181-000]
    BIOLOID FP04-F54 4pcs[903-0181-000]
    BIOLOID FP04-F54 4pcs

    ** DESCRIPTION
    - Exclusive plastic frame for Bioloid kit
    - High strength of engineering plastic
    - Can be affixed tightly using bolts and nuts
    - Grooved for tidy wiring and nut fastening

    ** INCLUDES
    - BIOLOID FP04-F54 (F54 frame) : 4 pcs

    *** Can be used for AX-series only. Not compatible with DX, RX, EX series.
    *** Bolts and nuts are sold separately. (BIOLOID Bolt Nut Set BNS-10).
    363円
    注文数:
  • BIOLOID FP04-F53 4pcs[903-0180-000]
    BIOLOID FP04-F53 4pcs[903-0180-000]
    BIOLOID FP04-F53 4pcs

    ** DESCRIPTION
    - Exclusive plastic frame for Bioloid kit
    - Strong engineering plastic
    - Can be affixed tightly using bolts and nuts
    - Grooved for tidy wiring and nut fastening

    ** INCLUDES
    BIOLOID FP04-F53 (F53 frame) : 4 pcs


    *** Can be used for AX-series Dynamixels only. Not compatible with DX, RX, EX series.
    *** Bolts and nuts are sold separately. (BIOLOID Bolt Nut Set BNS-10).
    363円
    注文数:
  • TB3 Ball Caster-A01 (1ea)[903-0262-000]
    TB3 Ball Caster-A01 (1ea)[903-0262-000]

    [903-0262-000] TB3 Ball Caster-A01 (1ea)

      

    ■ Description

    TurtleBot3 Ball Caster

    Compatible with 6mm plate and can be connected to the TB3 Waffle Plate.

      

    ■ Basic Components 

    Components

    Quantity

    Frame

    TB3 Ball Caster (Frame Steel Ball)

    1

    Screw

    PHS M2x6 TAP-K

    5

    Rivet

    Rivet (SRV-1I)

    5

     

     

    ■ How to Use

    BallCaster-A01_1.png

     

     

    ■ Compatible Products

    TB3 Waffle Plate IPL-01

    6mm parts

      

    ■ Hyperlinks 

    Download Drawing : Click Here

    3D Printing STL File : Click Here

    Download Assembly Guide : TurtleBot3 Burger

    Download Assembly Guide : TurtleBot3 Waffle



    363円
    注文数:
  • Battery Box ABB-010A[902-0036-001]
    Battery Box ABB-010A[902-0036-001]

    Battery Box BB-010A

     

     

    ** DESCRIPTION

    - A device that provides the main source of power for creating OLLO movements. (AA batteries required)

      - Can be assembled onto OLLO parts using rivets.

     

     

    INCLUDES

     

    Description

    Qty

    Power device

    Battery Box BB-010A

    1

    **Batteries not included.

     

     

    SPECIFICATIONS

     

    Weight

    5.9g

    Dimension

    18 x 18 x 60m

     

     THINGS TO KNOW :

    - Main controller for the OLLO (CM-100, CM-100A) uses 2 battery boxes.

    - Uses AA batteries.

    385円
    在庫切れ、お問合せ下さい。
  • BIOLOID FP04-F12 2pcs[903-0046-001]
    BIOLOID FP04-F12 2pcs[903-0046-001]
    BIOLOID FP04-F12 2pcs

    ** DESCRIPTION
    - Exclusive plastic frame for Bioloid kit
    - Can be used as soles of biped walking robot’s feet
    - High strength of engineering plastic
    - Can be affixed tightly using bolts and nuts
    - Grooved for tidy wiring and nut fastening

    ** INCLUDES
    - BIOLOID FP04-F12 (F12 frame) : 2 pcs

    *** Can be used for AX-series Dynamixels only. Not compatible with DX, RX, EX series.
    *** Bolts and nuts are sold separately. (BIOLOID Bolt Nut Set BNS-10).
    385円
    注文数:
  • BIOLOID FP04-F11 2pcs[903-0045-001]
    BIOLOID FP04-F11 2pcs[903-0045-001]
    BIOLOID FP04-F11 2pcs

    ** DESCRIPTION
    - Exclusive plastic frame for Bioloid kit
    - High strength of engineering plastic
    - Can be affixed tightly using bolts and nuts
    - Grooved for tidy wiring and nut fastening

    ** INCLUDES
    - BIOLOID FP04-F11 (F11 frame) : 2 pcs

    *** Can be used for AX-series Dynamixels only. Not compatible with DX, RX, EX series.
    *** Bolts and nuts are sold separately. (BIOLOID Bolt Nut Set BNS-10)
    385円
    注文数:
  • Power Switch PS-10[902-0035-000]
    Power Switch PS-10[902-0035-000]

     

     

    ■特徴

     

    - OLLO電池ボックスと減速モータを接続して点けたり消したりするスイッチです。

    - リベットを利用してロボットの様々な方向に結合することができます。 

     

    ■構成品

     

    - Power Switch PS-10 : 1個

       

    H/W 仕様

     

    - 重さ : 4g

    - サイズ : 24 x 18 x 15mm


    418円
    注文数:
  • BIOLOID FP04-F13/F14 4 Set[903-0050-001]
    BIOLOID FP04-F13/F14 4 Set[903-0050-001]
    BIOLOID FP04-F13/F14 4Set

    ** DESCRIPTION
    - Exclusive plastic frame for Bioloid kit
    - Can be used as a wheel when connected with AX-12A
    - Can be easily affixed on the horn of AX-12A using bolts
    - Wheels are made with strong engineering plastic to avoid breakdown
    - Tires are made with rubber to avoid skids

    ** INCLUDES
    BIOLOID FP04-F13 (F13 frame) : 4 pcs
    BIOLOID FP04-F14 (F14 tire) : 4 pcs


    *** Can be used for AX-series Dynamixels only. Not compatible with DX, RX, EX series.
    *** Bolts and nuts are sold separately. (BIOLOID Bolt Nut Set BNS-10).
    495円
    注文数:
  • BIOLOID 3P Extension PCB[903-0142-000]
    BIOLOID 3P Extension PCB[903-0142-000]
    DYNAMIXELのTTL(3P)ケーブル用の
    HUBです。
    3Pコネクター6個装着されTTLデジーチェン
    ポートのHUB接続が出来ます。
    多用すると通信波形がなまりますので注意が必要です。

    495円
    注文数:
12 3 4 5 6 7 8 9 次へ >>

(全商品:430点)

表示件数: