教育用ロボット、研究用ロボット、競技用ロボット、ROBOTIS、DYNAMIXEL、DARWIN-OP、DARWIN-MINI、ロボット部品、プロショップ、ロボット販売

dynamixel、ダイナミクセル、サーボ、ロボットサーボ、アクチュエータ、コマンド式、デイジーチェーン、ROBOTIS、ロボティス dynamixel、ダイナミクセル、サーボ、ロボットサーボ、アクチュエータ、コマンド式、デイジーチェーン、ROBOTIS、ロボティス

WidowX XM430 Robot Turret[IL-WXT-S]

クリックで画像を表示
クリックで画像を表示
クリックで画像を表示

クリックで画像を表示
クリックで画像を表示

The WidowX XM430 Robot Turret is a fully programmable pan and tilt system designed around the DYNAMIXEL  DYNAMIXEL XM-430-W350-T
servos from Robotis. The servos offer a high resolution of 4096 positions and user definable PID parameters. Temperature monitoring, positional feedback as well as voltage levels, load and compliance settings are all user accessible as well. At the heart of the WidowX XM430 Turret is the Robotis Open CM9.04-C open-source controller running on a 32bit ARM Coretex-M3.

Please note: The WidowX XM430 Turret will not hold position if power to the unit is lost, any equipment mounted may be damaged if not properly secured. Please use caution when mounting equipment that may be fragile or prone to damage if the turret loses power.

WidowX XM430 Turret
ProtocolTTL
Payload 2250g
Resolution4096
Weight1350g

INDUSTRIAL GRADE BEARING:

Each of the X-Series arms* features an industrial quality, high grade slewing bearing base as the central mounting point. The bearing ensures maximum rigidity and accuracy and takes all strain of the base servo increasing the longevity of the arms.



Product Features:XM430-W350-TServosIndustrial Bearing BaseOpenCM9.04-C for Onboard Processing2 DOFIncludes:2x XM430-W350 Actuators1x OpenCM9.04-C1x 12v5a Power Supply1x USB2 Micro Cable








DYNAMIXEL XM430-W350-T
Model NumberXM430-W350-T
Weight (g)82g
Dimensions (mm)28.5mm x 46.5mm x 34mm
Gear Ratio353.5 : 1
Operation Voltage (V)11.11214.8
Stall Torque (N.m)3.84.14.8
Stall Current (A)2.12.32.6
No Load Speed (RPM)434657
MCUST CORTEX-M3 (STM32F103C8 @ 72MHZ,32BIT)
Position SensorContactless absolute encoder (12BIT,360°) by AMS
MotorCoreless Motor
Resolution0.088° x 4,096
Operating RangePosition Control Mode : 360°
Velocity Control Mode : Endless turn
Input Voltage (V)10~14.8V (Recommended voltage : 12V)
Operating Temperature (°C)-5°C ~ 80°C
Command SignalDigital Packet
Protocol TypeHalf duplex Asynchronous Serial Communication (8bit,1stop, No Parity)
Link (physical)TTL Level Multi Drop Bus
ID253 ID (0~252)
Baud Rate9600 bps ~ 4.5 Mbps
FeedbackPosition, Velocity, Current, Realtime tick, Trajectory, Temperature, Input Voltage, etc.
MaterialCase : Metal (Front, Middle)
Engineering Plastic (Back)
Gear : Full Metal
Standby current40 mA





a
Mounting Hardware:
The base comes with mounting thumb screws to secure the arm easily to most any surface, wood screws are also an option for a more permanent mounting solution.

Documentation: