XH430-W350-R[902-0120-000]

ホーム
全件表示
DYNAMIXEL X
XH430-W350-R[902-0120-000]

・XH430-W350-RはROBOTISのDYNAMIXEL新製品です。

・特徴　高トルクタイプ　XMと違うのはマクソンモーターです。

・スッキリしたデザインでアクチュエータ自体が主張しません。

　この為、ロボットの設計自由度が向上しています。

・総アルミケース

・サイズはMX-28程度でトルクが向上しMX-64との間に位置します。

・トルクコントロールなどこのサイズでは多彩なファンクションが追加されました。

・コネクターがJSTの金メッキ（双葉のコネクターと同じ）になりました。

・この為配線関係が複雑になっています。専用フレームも数種発売。

・レゾリューションは12bit

・pwm駆動もできます。

・新製品なので質問があればお問合せ下さいフレームや配線なども変更されています。

[902-0120-000] DYNAMIXEL XH430-W350-R

■ Basic Features

The DYNAMIXEL X-Series is a new line-up of high performance networked actuators.

For more detailed information, please visit the DYNAMIXEL X-Series Product Information page.

• Improved Torque, Compact Design

• Enhanced Durability and Expandability

• Hollow Back Case Minimizes Cable Stress (3-Way Wiring)

• Frames Directly Screwed onto the Case (No Nuts Needed)

• Improved Aluminum Case Heat Sink

• 6 Operating Modes

• Current-Based Torque Control (4096 steps, 2.69mA/step)

• Profile Control for Smooth Motion Planning

• Trajectory Data and Moving Status (In-Position, Following Error, etc.)

• Energy Efficient (Standby Current Reduced from 100mA to 40mA)

■ Various Cabling Methods

■ Key Names

■ Model Numbering

■ Package Contents

Description		Quantity
DYNAMIXEL	XH430-W350-R	1
HORN	HN12-N101	1
WASHER	Teflon Washer (for Horn Assembly)	1
CABLE	Robot Cable-X4P 180mm	1
CABLE	Robot Cable-X4P (Convertible) 180mm	1
BOLT/NUT	Wrench Bolt (WB M2.5*4)	16
	Wrench Bolt (WB M2.5*8)	1
	Wrench Bolt (WB M2*3)	10
ETC	Spacer Ring	8

■ H/W Specifications

Model Number	XH430-W350-R
Weight (g)	82
Dimensions (mm)	28.5 x 46.5 x 34
Gear Ratio	353.5 : 1
Operating Voltage (V)	11.1	12	14.8
Stall Torque (N.m)	3.1	3.4	4.2
Stall Current (A)	1.2	1.3	1.5
No Load Speed (RPM)	27	30	37

MCU	ST CORTEX-M3 ( STM32F103C8 @ 72MHZ,32BIT)
Position Sensor	Contactless Absolute Encoder (12BIT,360°) by AMS
Motor	Maxon Motor
Resolution	0.088° x 4,096 steps
Operating Range	Position Control Mode : 360° Velocity Control Mode : Endless Turn
Input Voltage (V)	10~14.8 (Recommended : 12)
Operating Temperature (°C)	-5 ~ 80
Command Signal	Digital Packet
Protocol Type	RS485 Asynchronous Serial Communication (8bit, No Parity, 1 Stop)
Link (Physical)	RS485 Multidrop Bus (Daisy Chain)
ID	253 (0~252)
Baud Rate	9600 bps ~ 4.5 Mbps
Feedback	Position, Velocity, Current, Real-Time Tick, Trajectory, Temperature, Input Voltage, etc.
Material	Case : Metal (Front, Middle) Engineering Plastic (Back) Gear : Metal
Standby current (mA)	40

■ Default Settings

ID : 1

Baud Rate : 57600bps

*Please make necessary modifications to ID, baud rate, etc. after purchase.

■ Compatible Devices

Embedded Board : OpenCM9.04 & RS485 Expansion Board

PC Interface : USB2Dynamixel (Molex-JST Convertible Cable is required)

■ Development Environment

RoboPlus 2.0 (GUI Software) : download

OpenCM IDE : download

SDK : download

Drawings : download

E-manual : link

■ Caution

The DYNAMIXEL X-Series adopted a new gold-plated

JST connector for secure and reliable communication.

For more information, please see the [DYNAMIXEL Connector Standard] page on the e-Manual.

To control DYNAMIXEL X-Series actuators via OpenCM or USB2Dynamixel,

please use the JST-Molex Convertible Cable enclosed in the package.

	Product \| Product Configuration

Basic Feature

• Improved Torque, Compact Size
• Enhanced Durability and Expandibility
• Hollow Back Case Minimizes Cable Stress (3-way-routing)
• Direct Screw Assembly to the Case(without Nut Insert)
• Improved Heat Sink Featuring an Aluminum Case

Various Control Functions

•6 Operating Modes
•Current-Based Torque Control (4096 steps, 2.69mA/step)
•Profile Control for Smooth Motion Planning
•Trajectory Data and Moving Status (In-Position, Following Error, etc.)
•Energy Saving (Reduced Current from 100mA to 40mA)

Sophisticated Control Architecture

• various feedback and control method according to developers’ needs
• protocol 2.0 provides reliable packet communication

New H/W Architecture

• Improved Torque, Compact Size

• Aluminum Case: Improved Heat Sink Featuring & Enhanced Durability

• Compact Design
• Direct Screw Assembly to the Case (without Nut Insert)

• Hollow Back Case Minimizes Cable Stress
• Cable cover can Prevention Cable Seperation

Development Environment

•GUI version RoboPlus Task 2.0 RoboPlus Motion 2.0 RoboPlus Manager 2.0 •Official SDK 3.0 C (Win / Linux) C (Win / Linux) Python LabView Matlab JAVA C#